Line Marking FAQs

We offer line marking for car parks, warehouses and factories, roads, council and civil works, and airports across Adelaide and regional South Australia. Every job, from a single disabled bay to a full distribution-centre floor, is set out to the relevant Australian Standards and marked with premium, long-life road-grade paint for crisp, durable lines.

Line marking is priced on site size, surface condition, layout complexity and access. Simple car park re-marking is often quoted per bay, while larger set-outs are quoted as a project. Send your plans or a few photos and we'll return a fast, fixed-price quote, usually within 24–48 hours, with no call-out fee.

Line marking on a high-traffic car park or road typically lasts 6–18 months before it needs refreshing, while sheltered and low-traffic areas can last several years. Wear depends on traffic volume, surface condition and where the line sits, entry points, turning zones and wheel paths fade fastest. We apply premium road-grade paint at the correct rate for maximum life.

Yes, we mark to the relevant Australian Standards by default. Car parks are set out to AS/NZS 2890.1, accessible (disabled) bays to AS/NZS 2890.6 and AS 1428 / DDA, and road and traffic markings to AS 1742.11. Marking to standard is what keeps a site compliant with council, insurer and DDA requirements.

Yes, most car park line marking is completed after hours, overnight or on weekends so your site never stops trading. We section off freshly painted areas while they cure; standard line marking paint is touch-dry within the hour, so the disruption is minimal.

Yes, this is one of our most common jobs. We audit the existing layout, remove or black out non-compliant lines, and re-set the car park to current AS/NZS 2890.1 and AS/NZS 2890.6 standards, including disabled bays, arrows, walkways and numbering.

Yes, we mark DDA-compliant disabled parking bays to AS/NZS 2890.6 and AS 1428, including the international symbol of access, shared zones, bollard set-out and correct bay dimensions. Accessible parking is heavily regulated, so getting the dimensions, symbols and contrast right is essential to avoid complaints and non-compliance.

Yes, we mark forklift lanes, pedestrian walkways, hazard zones, racking and storage demarcation, and safety markings for warehouses and factories across Adelaide. Clear floor marking that separates pedestrians from moving plant is a recognised, cost-effective WHS control.

Yes, we regularly support councils, civil and asphalt contractors, developers and traffic-management teams across Adelaide and regional SA on road marking, line reinstatement after resurfacing, and new-estate works, with traffic control and after-hours work available.

Yes, we remove faded, redundant or incorrect lines using the right method for the surface (grinding, scarifying or blasting) to minimise ghost lines and scarring, then re-mark cleanly to current standards. Whether it's cheaper to remove or re-mark over existing lines depends on whether the layout is changing.

Standard line marking paint is touch-dry within the hour and the area is usually back in use the same day. We protect fresh lines with cones or barriers while they cure and give you clear return-to-use times for your site.

We provide line marking across all of Adelaide metro and regional South Australia, including Wingfield, Regency Park, Marion, Mawson Lakes, Salisbury, Elizabeth and Port Adelaide, plus regional centres like Gawler, Murray Bridge, Mount Barker, Victor Harbor, the Barossa, the Riverland, Whyalla and Mount Gambier. Regional travel is batched and costed up-front.

Yes, site assessments and quotes are free. Send your plans or photos for a fast fixed-price quote, or book a site assessment for larger jobs where we'll measure up, check compliance and recommend the right layout, all at no cost.

Yes, we're fully insured with public liability cover and back our work with a workmanship guarantee. If a line isn't crisp and to spec, we make it right.

Professional line marking improves traffic flow, pedestrian safety and site compliance with Australian safety standards. Clear, durable markings are essential for commercial, industrial and public sites, they reduce risk, keep car parks legible and protect you against compliance complaints.